rbent Forum
https://rbentonline.org/YaBB.pl General Category >> Photos >> Nimbus Tailbox / Tailsock https://rbentonline.org/YaBB.pl?num=1187048437 Message started by Bud_Bent on Aug 13th, 2007, 6:40pm |
Title: Nimbus Tailbox / Tailsock Post by Bud_Bent on Aug 13th, 2007, 6:40pm As tall as the Nimbus is, it will never be the fastest bike around, but I wanted to make it more aerodynamic, and I'm planning on making a bodysock for it for winter riding. The first step in improving its aerodynamics was the used Windwrap fairing I picked up last month. Next, here's the tailbox I finished for it, today. It's fabric covered coroplast. (Does that handlebar look familiar, Nelson?) http://i.imgur.com/FlG0F1J.jpg I had bought a closeout tailsock from Terracycle, to use in the summer, and for a pattern for the back half of the bodysock I plan on making. I decided to make the tailbox to go under the tailsock (and later, the bodysock), rather than making a frame for that. Here's the tailsock over the tailbox. http://i.imgur.com/VEw7LAD.jpg Just for a "before and after" comparison, here's the bike the day I brought it home last year. http://www.spinnerbaker.com/bud/images/nimbus1.jpg |
Title: Re: Nimbus Tailbox / Tailsock Post by Kwijybow on Aug 13th, 2007, 9:03pm Most Cool! You've done alot of work! How did you paint the frame (is it powder coated?) I'm looking for a good stripper/powder coater. I've been missing my Stratus lately. I'm still waiting for the Kogswell to get here and have a real commuter again. There no rocket launchers or oil sprayers in there? With the body sock and wild colors of your tailsock I feel certain combined with your powerful legs you'll be leaving the competition behind and thoroughly confused! :D Have fun, Nelson. |
Title: Re: Nimbus Tailbox / Tailsock Post by Bud_Bent on Aug 13th, 2007, 9:30pm Kwijybow wrote:
The frame was just sandblasted and dipped in a black oxide tank at work. Powder coating would have been nice, but this is a budget bike all the way. When I bought the used fairing, its mount was for a Rans riser, and my choppers bars were far too wide for the fairing anyway, so I went to the extra set of bars from the Stratus. |
Title: Re: Nimbus Tailbox / Tailsock Post by FlyingLaZBoy on Aug 14th, 2007, 4:00pm VERY nice work, Bud!!!!! |
rbent Forum » Powered by YaBB 2.1! YaBB © 2000-2005. All Rights Reserved. |