rbent Forum
https://rbentonline.org/YaBB.pl General Category >> Technical >> Short cranks https://rbentonline.org/YaBB.pl?num=1339205059 Message started by JimFPU on Jun 8th, 2012, 8:24pm |
Title: Short cranks Post by JimFPU on Jun 8th, 2012, 8:24pm Anyone have any that your willing to part with for testing Kim's Speed with them. Right now she has 165's on there and with her x-seam they're just a bit too long still... The brand is Truvativ Isis drive. Or does anyone have any crank shorteners? |
Title: Re: Short cranks Post by Denman on Jun 8th, 2012, 10:13pm Utah Trikes carries a set of 155 mm Mtn bike cranks for $75, but you'll need to buy sprockets because they are 4 bolt. Cat is 5 bolt. More then likely you'll need the bearing kit for bottom bracket too. We bought a 150 mm Divinci set from Hostel Shop, with bearings its about $200. Cat sprockets fit OK, but you'll also need 5 1/8" spacers for low gear. |
Title: Re: Short cranks Post by jayg on Jun 9th, 2012, 3:56pm http://www.bikesmithdesign.com/Short_Cranks/ http://www.amazon.com/Ride2-Crank-Shorteners-43mm-wide/dp/B002N2KJ7W http://www.hostelshoppe.com/cgi-bin/readitem.pl?Accessory=1033761548 |
Title: Re: Short cranks Post by JimFPU on Jun 9th, 2012, 8:52pm Thanks Jay, I found all those same things...big investment that we can try out first...was trying to see if any one had some to try and see if that would help the situation. |
rbent Forum » Powered by YaBB 2.1! YaBB © 2000-2005. All Rights Reserved. |